TANKCLEAN HD 船舱货仓油煤灰石油焦加强碱性清洗剂油船散货清洁剂

产品概述

TankClean HD 是强效碱性成分与精选添加剂的独特组合，确保每次都能实现最佳可靠的清洁效果。这款微乳液清洁剂特别适用于最难清洁和最脏的货物，如富含油的煤炭和石油焦。同时，它也能高效清洁大部分常见干货。

TANKCLEAN HD 
PCN: 3212-25L / 3213-1CBM
TankClean HD is a heavy duty alkaline cleaner with cutting-edge cleaning
technology formulated for cleaning cargo holds on bulk carriers.
Product information
TankClean HD is a unique combination of strong alkaline ingredients with selected additives enabling best 
and reliable cleaning results time after time. This micro emulsion cleaner is especially designed for the
toughest and dirtiest cargos such as oily coal and petcoke. As well it will powerfully clean off most common dry
cargos around.
Features
Advanced heavy duty alkaline cleaner
Highly effective and very economical in use
Ideal for cleaning after dirty petcoke, coal and other difficult cargoes
Safe on epoxy coatings
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Benefits
Saves cleaning time and cleaning chemicals
Predictable cleaning results
Complies with MARPOL Annex V
Complies with all environmental regulations and the EU Detergent Regulation
Specification
Physical properties
Appearance
Density [g/ml]
Form
pH
Colourless to pale yellow
Approx. 1
Liquid
Approx. 13
Approvals
Technical data
Not
Compatible
The concentrated product may react with aluminium,
zinc, tin and their alloys
This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be
discharged into the sea when used to clean cargo holds and external surfaces on ships.
Directions for use
Cargo Hold Cleaning:
TankClean HD effectively removes dirty cargoes like coal and petcoke and is used for cleaning when going from black to white 
cargos. CargoClean HD™ can be used for removal of the most dry cargoes including soot, carbon deposits, fish meal and other bulk 
materials. 
TankClean HD should not be used on zinc coatings.
Dosing and application method
1. Apply TankClean HD mixed 10% in fresh water (ratio 1:9), using the Unitor foam nozzle
2. To avoid loss of cleaning effect always apply the cleaning solution from bottom and upwards.
3. Leave for 10-15 minutes. During this time the surface must remain wet with the cleaning solution.
4. Wash down with a high pressure jet. For best results, direct the high pressure jet at the lowest parts of the holds first and work 
upwards
5. Repeat the cleaning procedure if necessary
6. Always perform final rinse with fresh water after wash down to avoid salt residues on the surface
7. Rinse the equipment with fresh water after usage and before storage.